所需经验和技能

• 1. 5+ years PM experience in mass production industry, RD involving is preferable;
• 2. Bachelor degree or above, oral/written English, PMP certificate, ISO 9000, MS-office;
• 3. Work with team members with different individual natural;
• 4. Arrange multi-tasks in meantime in a structure and professional way;
• 5. Fluent in spoken and written English.

性格

• 1. Good time management and skills in communication, result orientation, decision making;
• 2. Good skills in organization and quality orientation;
• 3. Sense of responsibility, team work, constructive, pre-active, Project Management;
• 4. Adjust way of work flexibly way in time manner, to adapt to changing situation. (biz wise, or project, and team wise)

主要工作描述

• 1. Work with Sales to figure out key customer's RD structure and key person;
• 2. Work with Sales to figure out contact person of project, work as general contact window from RD side;
• 3. Make project plan, be responsible for project output for key points of project milestone, acc. to procedure;
• 4. Cooperate resource of sample making, pilot run, sample and report delivery standing on RD side;
• 5. Highlight main problem in a structure way about project delay, delivery delay, and main issue with customer;
• 6. Maintain good work relation with RD engineers;

所需经验和技能

• 1. Bachelor degree or above in RF related field;
• 2. At least 3 years RF design experience in mass production industry is preferable;
• 3. Work with team members with different individual natural;
• 4. Arrange multi-tasks in meantime in a structure and professional way;
• 5. Oral/written English, RF knowledge, ISO9000, Product Creation Procedure

性格

• 1. Good time management and skills in communication, negotiation, decision making;
• 2. Good team work, constructive, and proactive.

主要工作描述

• 1. Well communication with customer to figure out customer's tech requirement;
• 2. Evaluate customers original input, provide counter proposal and negotiate with customer;
• 3. Make RF design for certain project;
• 4. Prepare RF sample, approval sheet, RF test instruction, with PM/ME;
• 5. Work with ME/PM for all design documentation from RF side;
• 6. Proactively involve project activities for RF and general projects issue;
• 7. Support production line for all design issue even after design release;
• 8. Support production line for non-design issue per reporter's arrangement;

所需经验和技能

• 1. At least 3 years working in electronics industry and Bachelor degree or above in Electronics major;
• 2. Specialized in using statistical, quality problem solving methods;
• 3. Proficiency in quality tools (5 manuals, risk evaluation…);
• 4. Ability to support critical voices in mass production phase (Leadership);
• 5. Ability to think ahead & be aware of possible problems (change management);
• 6. Fluent in spoken and written English.

性格

• 1. Having the full authorization to say "No" in critical situation;
• 2. Having a voice in solving conflicts in the team &between team & project leader.

主要工作描述

• 1. Coordinate related departments to analysis and resolve quality issue. Monitor the progress and result of the corrective actions;
• 2. Organize and review daily operation of the IPQC, FQC and OQC team within production;
• 3. Review and analysis quality data or information to ensure quality level is acceptable and plan for continuous improvement;
• 4. Establish and maintain inspection and quality system and production qualifications;
• 5. Guide, train and supervise the subordinates. Prepare work instructions for relevant processes;
• 6. Familiar with the production line goods, understand the design of non-standard automatic machine.
• 7. Support customer with complaint investigation in production area.

所需经验和技能

• 1. Bachelor degree or above.
• 2. More than 5 years related experience in electronics industry, antenna industry work experience is preferred;
• 3. Familiar with related soldering, SMT, HOTBAR welding, laser welding, high frequency welding, ultrasonic welding and other processes;
• 4. Familiar with cable line assembly bending, welding process;
• 5. Knowledge of standard automatic equipment such as dispenser, bonder, labeler and laser machine;

性格

• 1. Hard working, down-to-earth working, good communication skill, diligent learning, good at thinking, have a good team work spirit

主要工作描述

• 1. NPI Process Review: Evaluate new project process issues and RFQ;
• 2. Fixture design evaluation: synthesize the production line process to propose the fixture requirements, and review the fixture design with the fixture engineers;
• 3. Trial production stage exception analysis: analyze and judge the source of the problem (materials, fixtures, equipment, etc.), and lead the problem solution.
• 4. Lead or cooperate with ME, QE and other team members to complete a variety of DOE verification;
• 5. Edit SOP, PFMEA, Quality report, Process flow chart yield and other reports;
• 6. Responsible for the line automation program review, and non-standard automation design requirements;
• 7. Enhance production efficiency through process improvement.

所需经验和技能

• 1. Bachelor degree or above in mechanical related majors;
• 2. More than three years of structural design or related work experience, high-speed connector structural design and improvement experience is preferred;
• 3. Familiar with metal molding process including stamping, MIM, die casting and other related knowledge, familiar with plastic parts inject-molding knowledge;
• 4. Proficient in 3D and 2D design software such as Pro/E, AutoCAD etc;
• 5. Familiar with basic Excel, Word and other office software;
• 6. Fluent reading and writing in English; good in spoken English is preferred.

性格

• 1. Hard working, good at communication, negotiation, decision making;
• 2. Strong ability to identify problems and analyze and solve them.

主要工作描述

• 1. Evaluate customer's design drawings, assess DFM with mold makers and internal related departments, and give constructive suggestions for improvement;
• 2. Follow up the mold trial status with the mold factory, sort out the mold trial problem points and process parameters, push the mold factory to solve the product problems and assist PM to guarantee the delivery;
• 3. Contact customer PD and complete all evaluation reports.
• 4. Issue internal drawings and prepare BOM according to customer's design, cooperate with PM to complete NPI stage production and solve problems encountered;
• 5. Formulate DOE plan according to the trial production and promote the validation;
• 6. Communicate with PE and other departments on daily basis, and deal with other problems;
• 7. Collaborate with suppliers to deal with product technical problems;
• 8. Daily customization of product technical data and document issuance.